17-канальный щуп для профессиональной серии логических анализаторов Tektronix.
TLA6xx Logic Analyzers, TLA7Lx/7Mx/TLA7Nx/7Px/7Qx Logic Analyzer Modules

Цена за единицу - $85. В наличии 2 шт.

Recommended Use - Recommended for most general-purpose uses that require maximum flexibility
Attachment to Target System - Probe leadsets adapt to industry standard interfaces; leads spread over a wide area
Probe Type - General purpose, 17 channel passive probe
Logic Signals Supported - Single-ended Clock and Data (Differential signal adapters available)
Simultaneous State/Timing to - 200 MHz/2 GHz
Minimum Signal, Amplitude Minimum Single-ended - 500 mVp-p
Threshold accuracy: ± 100 mV
Channel-to-channel-skew: ≤1 ns
Input resistance: 20 KΩ
Input capacitance: 2.0 pF typical
Minimum slew rate: 0.2 ns
Maximum operating signal: 6.5 Vp-p; –3.5 V absolute input voltage minimum; 6.5 V absolute input voltage maximum
Maximum nondestructive input signal to probe: ± 15 V
Minimum input pulse width signal: 2 ns
Delay from probe tip to module input connector: 7.33 ns
Probe length: 1.8 m (6 ft)

The P6417 logic analyzer probes connect a Tektronix TLA series logic analyzer to a target system. Each probe consists of 16 data channels and one clock/data channel. You can connect the probes to the target system through the podlet connectors or through the lead sets (not included).
The P6417 has more flexibility than the P6418 - the 8 channel "podlet" can be split apart into separate channels.

Manufacturer List Price (US): $ 950
Datasheet Tektronix P6417 17 Channel Logic Probe: http://www.trs-rentelco.com/Specs-Manuals/TEK_P6417_Manual.pdf

Для работы с данным щупом так же предлагаем :
-8 Channel Single ended Lead Set for Podlet
В наличии 4 шт.

-Tektronix SMT KlipChip mini test probe Clip Chip Grabbers
В наличии шт.

Было найдено: 22.10.2016