WINDOWS 10 PRO 32/64 Оффициальный лицензионный ключ . Избавит вас от необходимости использования кряков и взломщиков. Помогу установить через Teamviewer при необходимости. Подходит для чистой установки или активации Windows 10 professional 32/64 бита. Так же есть другие, ключи.
Было найдено: 26.02.2020
Преобразование hdmi выхода на аудио в цифровом иди аналоговом формате, также возможен вывод видео в vga звук тюльпанами, spdif, hdmi. Вот полное описание на англ:
1X HDMI input and 1X HDMI output
1X VGA analog video sync output,
1X SPDIF optical digital audio and 6 channel RCA analog audio output that can connect with the amplifier or the TV directly.
MHL/HDMI working in dual mode, support audio and video input in MHL mode, and can charge for MHL equipment
Support CEC and HDCP
Supports 3 modes of EDID management for audio formats, can switch among built-in EDID (2CH/5.1CH) and external EDID (TV).
Uses 24 bit/96KHz audio DSP and 24bit /192KHz DAC
Support digital audio formats: Dolby digital (AC3), DTS, LPCM, automatic identification signal format
VGA output resolution format with the input format automatically changes
Headphone amplifier output, can drive the general 3.5mm earphone
High tone quality, low noise
DC5V/1A power adapter
Interface:
SWITCH:Audio EDID mode switch.
This switch allows users to select the source's audio EDID.
PASS:HDMI pass mode.
Switch to PASS mode for the HDMI source to output audio per the EDID of connected TV or AV receiver, supports up to LPCM 7.1 channels.
2CH:2CH LPCM mode.
Switch to 2CH mode for the HDMI source to output LPCM 2 channels audio per the built-in EDID.
Then HDMI, SPDIF, RCA and headphones output stereo audio.
5.1CH:5.1CH bitstream Mode.
Switch to B5.1CH mode for the HDMI source to output bitstream audio per the built-in EDID.
Then HDMI, SPDIF and RCA output 5.1CH audio, headphone output from FL and FR channel.
Specification:
HDMI resolution: up to 1080P/50/60 3D 24/30
MHL input resolution :720P 60Hz/1080P 30Hz/1080P 60Hz (packedpixel mode)
VGA output resolution:up to 1920 x 1080 60Hz
Support video color format :24bit/deep color 30bit,36bit
HDMI Audio Format:DTS-HD/Dolby-TrueHD/LPCM 2/5.1/7.1CH/DTS/Dolby-AC3/DSD
Digital audio decode format:Dolby Digital (AC3)/DTS/LPCM 2CH
HDMI Max bandwidth:225MHz
HDMI Max baud rate:675Gbps
Input/Output TMDS signal :0.5~1.5Volts p-p(TTL)
Input/Output DDC signal: 5Volts p-p (TTL)
DSP sample frequency range: 32-96khz
DSP Bit rate range:16-24 Bit
Analog output level(1kHz 0dB):1V RMS
SNR 0dB(CCIR/ARM):85dB
Distortion:0.1%
Frequency response:20Hz~20KHz
Headphone output power (1kHz 0dB RL=32):20mW
HDMI input cable distance:¡Ü15m AWG26 HDMI standard cable
HDMI output cable distance:¡Ü20m AWG26 HDMI standard cable
Max working current:550mA
Power adapter format Input: AC 100V¡«240V 50HZ/60Hz, DC5V/1A
Operating Temperature range: -10 to +55 degree Centigrade
Storage Temperature range: -20 to +60 degree Centigrade
Operating Humidity range :10 to 90%RH (No Condensation)
Storage Humidity range:5 to 95%RH (No Condensation)
Case Dimension (L x W x H): 200mm x 76mm x 26mm
Color: Black
Operating and Connecting:
Connect one HDMI cable from a DVD/Blu-ray player into input port of decoder.
Connect one HDMI/VGA cable from TV/Monitor into output port of decoder.
If you need a digital audio, connect one optical fiber from digital power amplifier into the SPDIF output port of decoder.
If you need an analog audio, Connect six AV cables from analog power amplifier into the analog audio output ports of decoder, the channel must correspond. If the connected TV or stereo power amplifier, connect the FL/FR two channel only, and switch EDID mode in 2CH.
If you need to use the headphone output, pls switch EDID mode in 2CH.
Connect 5V power supply to the decoder and inserted into the power socket.
Было найдено: 21.04.2018