Набор репродукций фоторабот известных фотографов(полиграфия),Германия,1966 г.В комплекте 40 шт
Размер 23,5х16,5.
Было найдено: 15.06.2018
Продам кассетную деку EUMIG FL-1000µP. Vintage. 1979 г.в. В деке применяется роликовый привод, практически в идеальном состоянии. 3 головки, 2 двигателя. Головки стеклоферритовые (не Акай). Автоподстройка тока записи под каждый тип ленты. 2 линейных выхода.Частотный диапазон 20 Hz-20 kHz. Made in Austria. Пишет и воспроизводит исключительно. Фактически, это ответ на Nakamichi 1000. Признана Лучшей декой Года. Tape speed: 4,75 cm/s
Deviation from nominal speed: ±0,5%
Tracks: 4
Transport: Without flywheel, by optoelectronic capstan control
Number of motors: 2
Number of heads: 3
Run-uptime: Less than 40 ms
Wow and flutter: 0,035% wrms, 007% DIN-weighted
Frequency response
Ferric tape: 20-20.000 Hz (30-18.000 Hz ±3dB)
Chromium tape: 20-22.000 Hz (30-20.000 Hz ±3dB)
Metal particle tape: 20-22.000 Hz (30-20.000 Hz ±3dB)
Erase attenuation: Better than 70 dB
Signal to noise ratio:
Without Dolby
Ferric tape: 57 dB
Chromium tape: 59 dB
Metal particle tape: 62 dB
With Dolby
Ferric tape: 65 dB
Chromium tape: 67 dB
Metal particle tape: 70 dB
With HighCom
Ferric tape: 75 dB
Chromium tape: 76 dB
Metal particle tape: 78 dB
Noise reduction system:
DOLBY NR or Telefunken HighCom with -9 dB position for playback of Dolbyised cassettes
Rewind time for C-60: Less Than 35 seconds (variable speed for fast forward and rewind)
Tape adjustment:
Computest® with microprocessor controlled bias fine adjustment and DOLBY calibration*) for each of the three types of tape
Level indication: Fluorescent peak level indicator with 2x14 segments, measuring range -20 to + 8 dB, with peak hold, dimmer, -6 dB switch for metal particle top and limiter with LED indication
Courier: A digit, electronic, with microprocessor control, location of any random tape position, memory
Automatic functions: Counter reset when open, cassette lid, Rewind and reset when inserting a cassette, Continuous operation, Recording via external
Inputs:
Line 1: 100mV/100 kOhrr,
Line 2: 100 mV/100kOhm microphone near 2 mV, microphone distant 0,2 mv/, suitable for low to medium impedance microphones
DIN: 1 mV/kOhm Earphones 8-2000 Ohms Inputs mixable with masva/ level control and fader ard cordless reverb automatic
Outputs:
Line fix: 775 mV/0dS/100 Ohm
Line variable: 0-775 mV/0dB/100 Ohm DIN: 775 mV/0 dB/500 Ohm
Dimensions: 455(W)x330(D)x177(H) mm
Weight: 12kg
Power consumption: 50W
Было найдено: 28.08.2017