After days of research, still no joy configuring my new Envision G22LWk 22" LCD monitor. It's native resolution is 1680x1050. I have an onboard Intel 915g video adapter.

I've tried to configure
/etc/X11/xorg.conf
in my Redhat ES 4.0 server without success.

The relevant section of xorg.conf (my most recent iteration) is:

Section "Monitor"
Identifier "Monitor0"
VendorName "Envision"
ModelName "LCD Panel 1680x1050"
Modeline "1680x1050" 146.25 1680 1784 1960 2240 1 501 - Показать номер - 9 1089 -hsync +vsync
DisplaySize 474 296
Option "DPMS"
EndSection

Section "Device"
Identifier "Videocard0"
Driver "i810"
VendorName "Videocard vendor"
BoardName "Intel 915G"
Option "NoDDC"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1680x1050"
Virtual 1680 1050
EndSubSection
EndSection

Section "DRI"
Group 0
Mode 0666
EndSection

Looking in
/var/log/Xorg.0.log
I see:
(II) I810(0): Integrated Graphics Chipset: Intel(R) 915G
(--) I810(0): Chipset: "915G"
(--) I810(0): Linear framebuffer at 0xD0000000
(--) I810(0): IO registers at addr 0xFF480000
(II) I810(0): 2 display pipes available.
(II) I810(0): detected 32508 kB stolen memory.
(II) I810(0): I830CheckAvailableMemory: 930812 kB available
(--) I810(0): Pre-allocated VideoRAM: 32508 kByte
(==) I810(0): VideoRAM: 65536 kByte
(==) I810(0): video overlay key set to 0x101fe
(**) I810(0): page flipping disabled
(==) I810(0): Using gamma correction (1.0, 1.0, 1.0)
(II) I810(0): BIOS Build: 1239
(II) I810(0): Using new Pipe switch code
(==) I810(0): Device Presence: disabled.
(==) I810(0): Display Info: enabled.
(II) I810(0): Broken BIOSes cause the system to hang here.
If you encounter this problem please add
Option "DisplayInfo" "FALSE"
to the Device section of your XF86Config file.
(WW) I810(0): Extended BIOS function 0x5f64 not supported.
(WW) I810(0): Extended BIOS function 0x5f64 not supported.
(WW) I810(0): Extended BIOS function 0x5f64 not supported.
(WW) I810(0): Extended BIOS function 0x5f64 not supported.
(WW) I810(0): Extended BIOS function 0x5f64 not supported.
(WW) I810(0): Extended BIOS function 0x5f64 not supported.
(II) I810(0): Currently active displays on Pipe A:
(II) I810(0): CRT
(II) I810(0): No active displays on Pipe B.
(==) I810(0): Display is using Pipe A
(--) I810(0): Maximum frambuffer space: 65368 kByte
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Loading /usr/X11R6/lib/modules/libddc.a
(II) Module ddc: vendor="X.Org Foundation"
compiled for 6.8.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 0.7
(**) I810(0): Option "NoDDC"
(II) I810(0): Will use BIOS call 0x5f05 to set refresh rates for CRTs.
(--) I810(0): Maximum space available for video modes: 32448 kByte
Mode: 30 (640x480)
ModeAttributes: 0x9b
WinAAttributes: 0x7
WinBAttributes: 0x0
WinGranularity: 64
WinSize: 64
WinASegment: 0xa000
WinBSegment: 0x0
WinFuncPtr: 0xc0005b2f
BytesPerScanline: 640
XResolution: 640
YResolution: 480
XCharSize: 8
YCharSize: 16
NumberOfPlanes: 1
BitsPerPixel: 8
NumberOfBanks: 1
MemoryModel: 4
BankSize: 0
NumberOfImages: 100
RedMaskSize: 0
RedFieldPosition: 0
GreenMaskSize: 0
GreenFieldPosition: 0
BlueMaskSize: 0
BlueFieldPosition: 0
RsvdMaskSize: 0
RsvdFieldPosition: 0
DirectColorModeInfo: 0
PhysBasePtr: 0xd0000000
LinBytesPerScanLine: 640
BnkNumberOfImagePages: 100
LinNumberOfImagePages: 100
LinRedMaskSize: 0
LinRedFieldPosition: 0
LinGreenMaskSize: 0
LinGreenFieldPosition: 0
LinBlueMaskSize: 0
LinBlueFieldPosition: 0
LinRsvdMaskSize: 0
LinRsvdFieldPosition: 0
MaxPixelClock: 230000000

Best resolution I can get is 1280x1024. (Although above xorg.conf gives 640x480.)

Any answers? Привезен из штатов. При включении белый экран появляется. Ремонт 400-450 гр. возможен обмен на телефон. Сам бы сделал но потерял телефон.

Было найдено: 25.12.2017